Recently I have had many inquiries about knife making and belt grinders.
Knife making is one of the most interesting parts of blacksmithing and is actually how my interest was peaked. Had I had a knife making belt grinder when I started it would have been so much easier.
In general there are four different steps in blade making.
- Forging the blade from the original bar. This is where the rough shape is created. You may have heard the old saying 5 minutes at the forge saves half an hour grinding. For me that certainly is about right.
- Primary and secondary grinding of the blade. This is creating the finished shape of the blade through a series of grinding and sanding steps. For me this takes the longest time and is the most exacting.
- Heat Treating. This is the hardening and tempering of the blade.
- Final sanding and polishing. This is when the blade is actually sanded to a perfect finish. You may choose to buff to a mirror finish as well.
Belt grinders are the best solution for blade making. They give you a flat surface to work on and remove material quickly with coarse grit. Fine grit can leave a satin finish to shiny if you go super fine.
The problem is that knife making belt grinders usually range in price from $1200.00 to $2500.00. Now that is a lot of money if you are just trying this out as a hobby. If you are committed then I would suggest looking at this price range. The standard in knife making is the 2 inch by 72 in belt grinder with usually a 1 hp or 2 hp motor.
Back when I needed a knife making belt grinder I couldn't afford to pay the $1000.00 plus for a factory built one, so I choose to build my own. So on a shoe string budget I built one. Does it work? Yes fairly well. There are things I should change on it, but in general I am satisfied with the finished piece. I used no plans and scrounged as much as I could.
I recently found good plans for a nice belt sander that requires no welding. It all bolts together!
Just Click on the above image to be taken to more information.
These plans provide simple construction just with cutting and drilling and bolting everything together. Of course you could weld the joints that needed welding, if you had a welder. It would only make it better.
Now you will have to recognize that some of the parts are expensive. Motors and contact wheels do start to add up, but this is the cheapest way to build a good quality grinder.
I also found this tool
This is very similar to a belt grinder that I started with before I built my big one. If you want to try knife making as a hobby and are on a tight budget this sander will work.
Now this is a light tool that bogs down if you are really trying to hog metal off and the small belts ( 2 inch by 27 inch) wear out quickly, but it will work. This one has 1/2 HP motor. The belts are pretty economical and this is a good way to see if you like knife making.
If you do like knife making and knife grinding then you will probably want to upgrade fairly quickly.
Now I did come across this machine and WOW! This is an industrial metal belt grinder. It sells for only $695.00 and has a 4 HP motor. This is twice the power of the best knife grinders at a 1/3 the price. It is solid and versatile. It uses a large 3 inch by 79 inch belt and has both contact wheel and flat platten for smooth grinding. Had I come across this knife grinder years ago I would have bought it.
There is a downside to it. This is 220 volt, 3 phase. Now 220 volt may not be a huge problem as most shops with serious equipment have 220 volts. 3 phase is usually limited to industrial areas. So now you would have the choice of replacing the motor, or buying a phase converter.
Both are about the same price. The phase converter for this belt grinder is recommended as
So we get back to about the $1000.00 mark but with a 4 HP motor to chew through the metal.
From everything that I have looked at, this is the most cost effective knife making belt grinder on the market. So I hope I have given you some options to look at if you are starting out in knife making or if you are looking to up grade to an industrial level.
Oh yes the most recent blacksmithing course I taught, the students were interested in making a knife as their Sunday afternoon project. They did quite well. I will put up a picture of mine when I get it finished. I still have some grinding left to do.